Yamaha YZF600 R6
08-11
YEC kit ECU tuning    


 

YEC ECU, 2008 yzf600 R6

 

08 YEC_yms2-1224-9694-3972.zip

08 YEC_usb_driver.zip

We tune YEC ECU's using the EC997 dyno -
No power commander required.

call 415 472 4962
M-F, 9-5

Sponsor Triple Crown Racing

( below, unverified as of 2008, 04, 13)

RE: Translogic (same as Dynojet)  Quickshifter:
Just a quick followup, the Dynojet tension sensor does indeed work. Connect the DJ blue wire to the YEC blue, the DJ/green to the YEC red/white.  I have the trigger voltage set to 2.5v in the YEC software, everything works perfect.

Notes:
That's not tested yet. It's here so I don't lose it -  Marc

...................................................................

Wire sub harness set  13S-F8610-70

1 that goes to ecu - 3 wire.
1 that goes to engine relay kickstand, etc.
1 that goes to ?? has lots of "things" on it.

Jeff Jones

 

Billet Engine Covers with Integrated Frame Sliders



This is the first set of 2008 R6 Billet Engine Covers off the Factory Pro CNC production line.

New Factory Pro 2006 R6 features include a raised slider mount bevel on the left side cover for even sharper looks. Looks even more refined than our other covers and provide 2x more protection than other billet engine covers.

These are the ONLY covers that help keep you bike AND cover off the ground!

The logo is parallel to the ground and the sliders are angled to match the fairing lines. (meaning: they look right on the bike)

 $289.95 LH cover with slider

  $189.95 RH cover with slider

Save!  Buy the cover set for $450  and save $29.90

both sides w sliders
Prototype Velocity Stacks (not available for retail, in house tuning only)
   

 

Hi Marc,

I ran Factory Pro engine covers on my rookie season in 2005 as a Novice rider with the CMRA.  As you know us rookies tend to crash a bit more than others.  I'm sure I'm not the first to say the covers and sliders ROCK!  On several lowsides throughout the season the bike slid on the sliders and never once tumbled.  I contribute this to the position on the slider on the bike.  Friends with conventional sliders found the slider digging in and flipping the bike causing much damage. Needless to say, my season ended in one Championship and two 3rd places.  CMRA seen fit to bump me to expert in 2006.  I purchased two brand new GSXR's and have already installed Factory Pro covers on the one through RaceworX in Dallas.  Unfortunately I had the chance once again on December 20th  at MSR Houston to test them out.  Once again they performed great!!!! The bike slid on the slider.  Beside a few scrapes on the plastic the bike was not damaged.
Thanks again,

Marv Esterly
 

True Rear Wheel Horsepowertm Factory EC997tm Eddy Current Dynamometer


   
   
   
   



Factory Pro Support Rider
Kent Larson at Gratton Raceway
(Kent wrote the software for the EC997 SAE Correction Tables)


EC997 Eddy Current Dyno in operation in Switzerland at 
Pichard Racing
Switzerland and France

Factory Pro Tuning Center locations
click here!

 


 

Links and ratings:

www.R1-forum.com and www.R6-forum.com
Not rated.
R1-forum and R6-forum are both associated with a retail vendor. According to moderator (12/21/05), venders who do not pay to sponsor the website are not permitted to post. That may be financially good for McCoy Motorsports, but it's not good for the members of the forum, who rightly expect unbiased technical hints from qualified individuals and are, unknowingly, instead getting them from paid sponsors of the site. Perhaps McCoy should simply post that information for members to explain that they selectively block access to the site and let the users make more informed decisions from other websites.
Until resolved, R1 and R6 forum members will not be able to access their 15% forum discount.
To contact McCoy / R1-forum / R6-forum and ask them to change their policy - mail he


 


Z1 CycleTech | Performance Parts and Accessories for the Hard-core: street and race
Ontario Canada

 

New and improved
Suzuki Teka SFI 2
with new TPS display and "MMT" Memory Module Tuner feature

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 6pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 491-5920

fax 415 492-8803

parts information
 info@factorypro.com

EC997 dynamometer information
info@factorypro.com

Product Support /Tech SECTION
click here

 

Mailing / Shipping address:

Factory Pro
179 Paul Drive
San Rafael, CA 94903
USA

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...

restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.gigits.com - the oldest counting service on the web

 

San Rafael and San Francisco

          

 

LINKS

The below links are people and companies that are consistently impressive with their continual uniqueness and dedication to providing traditionally valued, quality products and services.
Marc
 

The Harringtons own American Flyers, one of the most established flight training facilities in the USA - 8 locations -
 800-362-0808

Flight Training - train with AMA race winner Todd Harrington.
I saved ~10% switching my auto insurance. Marc

Insurance Quote ONLINE Clearinghouse

Fill out one form - Get ONLINE realtime quotes from multiple companies - One Stop auto, home and more from insurance companies you already know.



Train to Win
The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

Factory Pro 2012 Winter FLYING Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over Infineon Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
(NEW!  Ask about the P-40 and P-51 flights!)

707 938 2444

Just tell them that you saw this on the Factory Pro website!
Marc

Northern California's most unforgettable flying experience.  No experience required.  Open weekends!

Make your next tour Unforgettable,  Affordable and Exotic.
Superbike Tours Thailand - See you there.

Geoff@superbiketoursthailand.com
Supwebike Tours Thailand
The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.
 

Artisan Crafted Fine Cheeses – Since 1865   -    Specializing in Handmade Brie & Camembert

Marin French Cheese Co., also known as The Cheese Factory and Rouge et Noir is not just the oldest cheese manufacturer in the country, but a vacationers and day trippers destination as well as a unique part of American History. Located north of San Francisco, east of Napa County, west of Pt. Reyes and Olema and south of Sonoma County, Marin French has produced hand crafted Artisan soft ripened cheese since 1865. Rouge et Noir cheeses are similar to French and European varieties but reflect the characteristics of Northern California, producing it's own regional style.