2010 Upgrade Options

Bring your EC997 up to the latest standards in the industry - even a 20 year old EC997 can read as quickly and accurately as a 2010 model.

We like to have the upgraded Controllers and EGA's for a week, so that we can test them under work conditions.

Generally, they are built, bench tested and then Marc Salvisberg uses each Controller and EGA to verify that there's no mechanical or electronic issues with any of the units.  That prevents you from receiving a unit that was never tested in service and maybe only "bench tested".
Marc usually uses them as long as he can, and they are carefully packaged up, often still a bit warm from use.
If you point the camera up above the dyno room monitor, sometimes you'll see a Controller with it's case off - That one is being tested. Dyno Cam Link (uses Explorer only)

EGA - the same way - Every one is "work tested" before it's shipped.

Upgrade your EC997 or EGA system - Make your tuning quicker, easier and even better. What more could you ask for......

Thanks -

Call 800 869-0497 or 415 491 5920 (remember it's California Time Zone and -7 or -8 GMT)

2010 Dyno Controller Upgrades
Jan 2010 and later USB Dyno Controller

 

 to NOx SOFTWARE activation only   $1000

(requires upgraded EGA - below)

 allow 1 week + shipping

Expedite available
2008-2009 USB Dyno Controller to 2010 USB Controller with Improved Sweep Test 2010 Adds

Improved  Sweep Functionality to 2010 EC997 standards

Power Graph during test: see "better or worse than your reference file" results during the test instead of wasting time by completing a full length test with a  "mod" that isn't working beneficially

Event Recorder: see Realtime power trend line DURING a Steady Sate test - helps tune ignition and fuel

Quicker reacting and higher resolution

Auto Weather Link - auto correction factoring or manual backup (requires $200 link to activate)

All the software improvements we've made in the last 2 years

 requires firmware update - must send in Controller  

price on request - call

allow 1 week + shipping

Expedite available
2008-2009 USB Dyno Controller to 2010 USB Controller with Improved Sweep Test PLUS NOX 2010 Adds

Improved  Sweep Functionality to 2010 EC997 standards

Power Graph during test: see "better or worse than your reference file" results during the test instead of wasting time by completing a full length test with a  "mod" that isn't working beneficially

Event Recorder: see Realtime power trend line DURING a Steady Sate test - helps tune ignition and fuel

Quicker reacting and higher resolution

Auto Weather Link - auto correction factoring or manual backup

All the improvements we've made in the last 2 years

 $1500

requires firmware update - must send in Controller

allow 1 week + shipping

Expedite available
Older non-USB serial dyno Controller to 2010 USB Controller including new 2010 software
5 gas  WITH  NOX		 2010 Adds

New - Power Graph during test: see "better or worse than your reference file" results during the test instead of wasting time by completing a full length test with a  "mod" that isn't working beneficially

New - Event Recorder: see Realtime power trend line DURING a Steady Sate test - helps tune ignition and fuel

Quicker reacting and higher resolution

Auto Weather Link - auto correction factoring or manual backup

All the improvements we've made in the last 10-15 years

 $4500 with NOx

$3500 No NOx

above w/ rack mount serial dyno controller trade in

Auto weather link requires $200 converter to activate

That's like a new 2010 dyno....

allow 1 week + shipping

Expedite available
EGA Upgrades
4 gas EGA
(stainless steel case)		 to 5 gas EGA  functionality (NOX) Adds

NOx: for even quicker and more detailed fuel AND Ignition timing - esp. good for HD and high performance engines.

Service your EGA foundation and modify for NOX sensor

 $1250
clean and modify for NOX includes NOX  sensor

requires 2010 Controller and 2010 software and NOX read activation
(see above)

 allow 1 week + shipping

Expedite available
older 4 gas EGA
(grey box WITHOUT Water Separator)		 to 4 gas EGA
(stainless steel case)		 Adds

New Factory Pro EGA's read quicker, have more filters and are easier to service and they look more professional, too

Current 2010 software features (see above)

Service your EGA foundation and modify for NOX sensor

 

 $7000

less $2000 trade-in

Works with newer and older serial and USB Controllers and software

  
4 gas or 5 gas EGA
(all stainless case models and a couple late "grey box" EGA's)		   Clean and Service Service

filters

hoses

pump diaphragms

$775
+ O2 and NOX sensors if required / requested		  

Allow 1 week + shipping

Expedite available
Replace Systems on an old EC997 mdc-ATV mdc-325
old, missing, rusty, corroded, rained on Controller and "Mustang" wall mounted  "grey Box" to 1. 2010 EC997 Controller
2. 2010 EC997 Software
3. New "Mustang" style PAU box 		Bring a 20 year old dyno to far beyond current dealership level dyno standards.

Latest EC997 controller software - The easiest, most sophisticated Tuning software. It's specifically designed for a tuner who works on multiple bikes - all with different setups. Other software brands are maybe great for an engineer,  but poor for tuning at a tuning facility with 10 different bikes a week.
The EC997 dyno software is the only software that has always had the higher level 4 gas EGA data automatically recorded. The others generally "tune to some AFR".
The EC997 dyno software is second to none for displaying the data that a tuner needs to see in order to produce "tuning perfection". We've sold dynos to some people for that reason alone.
Easiest setup.
Exquisite Steady State Testing
The most flexible Sweep Tests Control in the industry
220 single phase power required for PAU

 $8500
+ cables, mag sensor or load cell.		 + shipping

4-6 week delivery
Old, or missing EGA only   2010 Factory Pro high speed 4 gas EGA The quickest reading 4 gas EGA we've ever made - High accuracy - high speed -

Unlike hand held 4 gas EGA's, the Factory Pro EGA is designed to work for extended hours, quickly, without emptying water traps and changing filters.

 $7000
(requires the ^ above 2010 Controller and 2010 software)		 + shipping

4-6 week delivery
all missing.....   Both the the above ^ package price $12,500
$14,500 value save $2000		 + shipping

4-6 week delivery