Suzuki GSX600F Katana, 88-89
Factory Pro Series "S01"


The Carb Recal Kit and the Ignition Advance Rotor perks up the low-end and midrange power and response for quicker warm-up and more response. The Transmission Detent Spring Kit really puts "snap" into the shifting.

Factory Pro / Wheelsmith Racing won lots of California AFM roadraces with our own beloved Can-a-Tuna in 1989.
Our carb kits, ignition advancers and shift kits were proven to provide the best and smoothest power and performance - making even our racebike a wonderful streetbike, too!.


Item Description
 



Long Boy Extended Fuel Screw set
pn: CRZ-SCR-SUZ-5020M
$79.95
 with 4 new screws, springs, washers and o-rings

1. Choose your shipping method

2.

 

"Long Boy"

Finger and screwdriver adj. extended Fuel Screw Kit

Frustrated with trying to find an "almost 90 degree"  screwdriver to fine adjust your fuel screws for best idle and cruise?
Use Factory Pro's new "finger adjustable" fuel screws to adjust fuel screws for best throttle response. Traveling to high altitude? It's easy to lean out the lowend temporarily.

Make your life easier.

Installation:
Remove old short stock fuel screws, old orings, old washers and old spring. The o-ring might be stuck in the carb, so, take a light and make sure it's really out if it didn't come out with the screw (or you can't find it after you took out the screw)
Use a small bent wire to pull it out if it doesn't drop out. Keep the old parts for "spares".

Fuel screw assembly comes with:
4 Long Boy fuel screws
 4 new o-rings
4 new washers
4 new springs

 


CRB-S01-1.0

$139.95


International buyers will be billed an additional $18 for shipping

 

Standard drop-in carb kit

The kit, when properly tuned, adds more low-end / midrange and if the proper main jet is selected, more top-end power. Easy to install and tune - no slide drilling!

CRB-S01-3.0-AFK
with filters

$249.95

Config 30 carb kit


Requires removal of stock airbox and running K&N or equivalent individual air filters. Otherwise, it is a drop-in kit. Low-end response is as good as, if not better than stock carb tuning.


RTR-SUZ-4

$89.95

Ignition Advancer Rotor

This simple, bolt-on advance kit advances the timing. With stock engines with stock compression ratios, there is more power everywhere. Part throttle power is better - helping corner exit speeds. Improved in-town drivability and quicker warm-up.

Installs with a socket set, a 5mm and 6mm allen wrench and a 19mm wrench. It's right under the right side engine cover (the palm sized one). It only goes on one way and no oil leaks out when the cover is off.
 
$64.95


SHFT-PRO-SUZ-3    $139.95
(MicroBearing detent arm, detent spring and oil pan gasket)

1. Choose your shipping method

2.



Microbearing Detent Arm
Pro Shift Kit
Includes Factory Pro Spring and Factory Pro MicroBearing Detent Arm and F-Pro Shift Spring

This Pro Shift Kit includes the Microbearing Detent Arm. This kit shifts easier than the below Spring Kit.

Make shifting MUCH slicker, quicker and virtually eliminate missed shifts. Especially 2nd gear.
This is the kit that puts "snap' back into the trusty Kat.

Helps prevents shift fork and gear engagement dog damage caused by missed shifts. Especially 2nd gear.

No case splitting required. If you can change an oil pan gasket, you can do this. 2-3 hours labor (if you are taking your time).

TL-float height gauge
$59.95

The only way to accurately measure float heights. Works on nearly every carburetor.

True Rear Wheel Horsepower® Factory EC997a Eddy Current Dynamometer

Looking for your idle mixture screws?  Here is where they are located:


 

Misc. Information

Ignition trigger OEM part numbers

GSX600F Katana (unrestricted) 88-95 33120-19C00 Use Factory Pro RTR-SUZ-4
GSX600F Katana (unrestricted) 96-99 33120-19C20 Similar timing as "19C00", cosmetic change. Use Factory Pro RTR-SUZ-4
GSX600F Katana (CA model) 88-93 33120-48B20 Use Factory Pro RTR-SUZ-4. Upgrades to 49 state low rpm timing. Improves low rpm / off-idle response.
GSX600F Katana (CA model) 94-96 33120-26D00 Use Factory Pro RTR-SUZ-4. Upgrades to 49 state low rpm timing. Improves low rpm / off-idle response.
GSX600F Katana (CA model) 97-99 33120-19C20 Similar timing as "19C00". Use Factory Pro RTR-SUZ-4

 

Absolutely NO carb parts sold in California.

New and improved
Suzuki Teka SFI 2
with new TPS display and "MMT" Memory Module Tuner feature

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 5pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 883-5620

no fax

Factory Pro
101c Roblar Drive
Novato, CA
USA

If it's
4pm at Factory Pro it's 9am in eastern Australia.

parts information
 info@factorypro.com

EC997 dynamometer information
info@factorypro.com

Product Support /Tech SECTION
click here

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...

restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.digits.net - the oldest counting service on the web
Clock widget          

 

 

LINKS

The below links are people and companies that are consistently impressive with their continual uniqueness and dedication to providing traditionally valued, quality products and services.
Marc
 


Flight Training - train with AMA race winner Todd Harrington.

The Harringtons own American Flyers, one of the most established flight training facilities in the USA - 8 locations -
 800-362-0808


Train to Win
The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

WW2 vintage flying Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over famous Sonoma Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
NEW!  Ask about the P-40 and P-51 flights!

707 938 2444

Just tell them that you saw this on the Factory Pro website!
Marc
Northern California's most unforgettable flying experience.  No experience required.  Open weekends! Call ahead in the winter.

Make your next tour Unforgettable,  Affordable and Exotic.
Superbike Tours Thailand - See you there.

Geoff@superbiketoursthailand.com
Supwebike Tours Thailand
The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.
 

Artisan Crafted Fine Cheeses – Since 1865   -    Specializing in Handmade Brie & Camembert

Marin French Cheese Co., also known as The Cheese Factory and Rouge et Noir is not just the oldest cheese manufacturer in the country, but a vacationers and day trippers destination as well as a unique part of American History. Located north of San Francisco, east of Napa County, west of Pt. Reyes and Olema and south of Sonoma County, Marin French has produced hand crafted Artisan soft ripened cheese since 1865. Rouge et Noir cheeses are similar to French and European varieties but reflect the characteristics of Northern California, producing it's own regional style.