Old style Factory Pro chrome cover with Cobra grooved outer faux cover


VN1500 Classic / Nomad  -  1996 to 2004

 

Long Boy Extended Fuel Screw

Long Boy Extended Fuel Screw
$22.95
pn: CRZ-SCR-3518k2
 with 1 new screw, spring, washer and o-ring

1. Choose your shipping method
2.  

"Long Boy"
 Finger and screwdriver adjustable extended Fuel Screw assembly

Frustrated with trying to find an "almost 90 degree"  screwdriver to fine adjust your fuel screw for best idle and cruise?
Use Factory Pro's new "finger adjustable" fuel screw to adjust fuel screw for best throttle response. Traveling to high altitude? It's easy to lean out the lowend temporarily.
Make your life easier.

Installation:
Remove old short stock fuel screw, old o-ring, old washer and old spring. The o-ring might be stuck in the carb, so take a light and make sure it's really out  (or you can't find it after you took out the screw)
Use a small bent wire to pull it out if it doesn't drop out. Keep the old parts for "spares".

Each Screw assembly kit comes with:
1 long Boy Extended Fuel Screw
1 new spring
1 new washer
1 new o-ring

              

   
 
CRB-K99-1.0
(stock/K&N air filter - fits all 96-05)
$79.95

International buyers will be billed an additional $18 for shipping

STD drop-in carb recal kit
Boosts power a bit at full throttle, improves throttle response and wheelie ability. Definitely pulls harder out of 2nd and 3rd gear corners! No slide drilling.
Notes:
Fuel delivery below 3k is controlled by the fuel level (aka "float height"). To properly dial-in the full throttle/low rpm power, fine adjustment is always beneficial.  If the bike responds to full throttle at below 3000 rpm OK when cooler, but not quite as well when fully warmed up, the fuel level is too rich - and you need to lean it out -

Model Test Type Exhaust Carb Setup Max.
True Rear Wheel HP
Vulcan 1500 Classic VN1500d Base Test VHR Exhaust all stock ~50hp SAE corrected
Final VHR Exhaust CRB-K99-1.0 ~51.7hp SAE corrected
Benefits and Desc: The Vulcan will run smoother, when warming up, in less time than stock carb. Mileage reports indicate the same, very slightly less to very slightly better! The kit adds a bit more top-end power, but the the biggest improvement is in part throttle power. Freeway roll-on power is improved, as is around town drivability. The kit nearly always drops in to a stock bike at suggested settings and works extremely well, based on customer feedback. For more top-end power, while retaining the same low-end and midrange as the "1.0" kit, use the Vulcan Classic AirBox Plus 2.0 Kit!
PS: Don't forget that adjusting the float height is extremely important for low speed jetting. Click here for "How to" set floats.

Lower red plot showing that the engine is actually cleaner running AFTER the Factory Carb Recal Kit was installed and tuned on the EC997 Eddy Current Dyno!

 

 
CRB-K99-3.0
for 95-04
for Hypercharger and equivalent

$79.95

International buyers will be billed an additional $18 for shipping

Carb kit for if using a Hypercharger or equivalent intake kit.

 

 


AirBox Plus
New style HEAVY billet air filter cover!
Black or Silver
and matching carb kit
CRB-K99-2.0 Classic 96-97 only

$229.95

Cover plate color


International buyers will be billed an additional $34 for shipping

APK
AirBox Plus - airbox removal kit

+7.1 TRUE HP
95-97 years 

Benefits and Desc:
Removes the LH air filter housing to clean up the bike and adds an open "hot rod" type open element air filter and 9" FLAT Black or Silver  anodized BILLET cover assembly to the RH side of the bike.

Customer pictures below show an aftermarket cover installed over the top of the supplied simple, flat chrome cover.

The Vulcan will run smoother -  warming up in less time than the stock carb.
Mileage reports indicate the same consumption, very slightly less to very slightly better! The kit adds significantly more top-end power, ~6-7hp. More than K&N and most airbox kits.
Peak power on an EC997 Eddy Current Dyno or out on the road (the real last word...) is as good as if not a bit better than an aftermarket 41mm flatslide carb with the same filter setup or other supplied filter arrangement on a stock engine.
There is a large improvement in drivability, as in the standard "1.0" Kit. Freeway roll-on power is not just improved - it's great!
This kit also, nearly always drops-in to a stock bike with a good exhaust system, at suggested settings and works extremely well, based on customer feedback. Check out the
VROC Owners Group. This kit also nearly always drops in to a stock bike with a good exhaust system, at suggested settings, and works extremely well, based on customer feedback. Check out the VROC Owners Group.
For a "1.0" kit, use the Vulcan Classic 1.0 Kit

Kit includes:
Solid Billet AC cover
Quarter turn billet, oring sealed Factory Pro (ok - it 'turns' with a quarter about 6 turns to remove)
Custom made Unifilter air filter with outer screen
Special Factory Pro Carb kit specifically designed for open air box applications
 

Base Test

VHR Exhaust

stock carb and air cleaner ~50hp SAE corr.    
Final

VHR Exhaust

CRB-K99-2.0 ~57.1hp SAE corr.    
CRB-K98-2.0
for Classic and Nomad
98-04

$229.95

Cover plate color

International buyers will be billed an additional $34 for shipping
The only difference between the K98 and K99 is the shape of the supplied crossover block off plate that goes onto the backside of the RH air filter housing.

 

 

Links:

This Carb Recal Kit developed on the same EC997a Eddy Current dyno that developed the K59-1.7-RK ZX6r RaceKit (Muzzy and Kinko's choice), the Y73-1.7-RK YZF750 (Vance and Hines choice), S37-1.7-RK GSXR750 x, Suzuki of France and most of America's privateer racers choice)...

 

 
Absolutely NO carb parts sold in California.

New and improved
Suzuki Teka SFI 2
with new TPS display and "MMT" Memory Module Tuner feature

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 5pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 883-5620

no fax

Factory Pro
101c Roblar Drive
Novato, CA
USA

If it's
4pm at Factory Pro it's 9am in eastern Australia.

parts information
 info@factorypro.com

EC997 dynamometer information
info@factorypro.com

Product Support /Tech SECTION
click here

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...

restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.digits.net - the oldest counting service on the web
Clock widget          

 

 

LINKS

The below links are people and companies that are consistently impressive with their continual uniqueness and dedication to providing traditionally valued, quality products and services.
Marc
 


Flight Training - train with AMA race winner Todd Harrington.

The Harringtons own American Flyers, one of the most established flight training facilities in the USA - 8 locations -
 800-362-0808


Train to Win
The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

WW2 vintage flying Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over famous Sonoma Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
NEW!  Ask about the P-40 and P-51 flights!

707 938 2444

Just tell them that you saw this on the Factory Pro website!
Marc
Northern California's most unforgettable flying experience.  No experience required.  Open weekends! Call ahead in the winter.

Make your next tour Unforgettable,  Affordable and Exotic.
Superbike Tours Thailand - See you there.

Geoff@superbiketoursthailand.com
Supwebike Tours Thailand
The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.
 

Artisan Crafted Fine Cheeses – Since 1865   -    Specializing in Handmade Brie & Camembert

Marin French Cheese Co., also known as The Cheese Factory and Rouge et Noir is not just the oldest cheese manufacturer in the country, but a vacationers and day trippers destination as well as a unique part of American History. Located north of San Francisco, east of Napa County, west of Pt. Reyes and Olema and south of Sonoma County, Marin French has produced hand crafted Artisan soft ripened cheese since 1865. Rouge et Noir cheeses are similar to French and European varieties but reflect the characteristics of Northern California, producing it's own regional style.